Skip to content

Panamax MR4300 Power Conditioner and Surge Protector

by Panamax
UPC: 50616008938
Call for Availability
$389.95

SKU MR4300
Condition: New

Product Qualifies for FREE Ground Shipping

Panamax MR4300 Power Conditioner and Surge Protector

Panamax s MR Family of products offers several layers of surge protection. Panamax s patented Automatic Voltage Monitoring (AVM) technology continuously monitors the incoming power. In case of an undervoltage or brownout (too little electricity) or an overvoltage (too much electricity) a flashing red lightning bolt will be displayed and power to the equipment is automatically turned off. When voltage returns to a safe level, power to the equipment is automatically reconnected.



The other layer of surge protection Panamax offers is our exclusive Protect or Disconnect technology. This ultra fast protection circuitry completely protects your equipment from surges such as lightning. When overwhelmed with extreme catastrophic events, Panamax permanently disconnects AC power to equipment. All Panamax products offer this core protection technology.



Protecting a complete system may sometimes require that signal wires coming out of the wall be protected as well. Panamax has you covered there too. Universal ultra low-loss coaxial protection (as well as LAN/Ethernet) protection prevents signal lines from carrying damaging surges while maintaining full high-definition and high-speed Internet signals to your equipment for your connected life. See our product demonstration page for some



Specs
AC Protection

Voltage Protection Rating (UL 1449 3rd Edition, 3,000A) 330V


Under-voltage shutoff 100V 2V


Thermal Fusing Yes


Single Pulse Energy Dissipation 1575 Joules


Response Time < 1ns


Protection Modes L-N, L-G, N-G


Protect or Disconnect Circuitry Yes


Over-voltage shutoff 135V 2V


Nominal Discharge Current (UL 1449 3rd Edition) 3,000A


Maximum Current Rating 15A (1800W)


Line Voltage 120V, 50/60Hz


Initial Clamping Level 200V Peak, 141VRMS


Automatic Voltage Monitoring Circuit



Linear Level 3 Noise Filtration

Bank 1


-70dB min. @ 100kHz


-65dB min. @ 250kHz


-45dB min. @ 500kHz


Max filtration: -80dB @ 150kHz


Bank 2 - High Current, Low Impedance


-50dB min. @ 100kHz


-60dB min. @ 250kHz


-45dB min. @ 500kHz


Max filtration: -63dB @ 250kHz



General

Weight 6.5 lbs.


Rack Ears Included


Dimensions 6 l x 17 w x 1.75 h, 2.19 h with feet



LAN Protection

Wires Protected 8-Wires


Jacks RJ-45


Compatibility 10/100/1000bT


Clamping Level 62V 6V @ 1 mA



TEL Protection

Wires Protected 2 Wires, 1 Pair (4, 5)


Jacks RJ-11


Fuseless/Auto-Resetting Yes


Clamping Level 260V



Universal Coax Protection

Shielded Yes


Insertion Loss < 0.5 dB


HD 1080 i/p Ready Yes


Frequency Range 0 MHz - 2.2 GHz


Connections Female "F", Gold Plated


Clamping Level 75V


Bidirectional Yes



Panamax MR4300 Power Conditioner and Surge Protector

Panamax s MR Family of products offers several layers of surge protection. Panamax s patented Automatic Voltage Monitoring (AVM) technology continuously monitors the incoming power. In case of an undervoltage or brownout (too little electricity) or an overvoltage (too much electricity) a flashing red lightning bolt will be displayed and power to the equipment is automatically turned off. When voltage returns to a safe level, power to the equipment is automatically reconnected.



The other layer of surge protection Panamax offers is our exclusive Protect or Disconnect technology. This ultra fast protection circuitry completely protects your equipment from surges such as lightning. When overwhelmed with extreme catastrophic events, Panamax permanently disconnects AC power to equipment. All Panamax products offer this core protection technology.



Protecting a complete system may sometimes require that signal wires coming out of the wall be protected as well. Panamax has you covered there too. Universal ultra low-loss coaxial protection (as well as LAN/Ethernet) protection prevents signal lines from carrying damaging surges while maintaining full high-definition and high-speed Internet signals to your equipment for your connected life. See our product demonstration page for some



AC Protection

Voltage Protection Rating (UL 1449 3rd Edition, 3,000A) 330V


Under-voltage shutoff 100V 2V


Thermal Fusing Yes


Single Pulse Energy Dissipation 1575 Joules


Response Time < 1ns


Protection Modes L-N, L-G, N-G


Protect or Disconnect Circuitry Yes


Over-voltage shutoff 135V 2V


Nominal Discharge Current (UL 1449 3rd Edition) 3,000A


Maximum Current Rating 15A (1800W)


Line Voltage 120V, 50/60Hz


Initial Clamping Level 200V Peak, 141VRMS


Automatic Voltage Monitoring Circuit



Linear Level 3 Noise Filtration

Bank 1


-70dB min. @ 100kHz


-65dB min. @ 250kHz


-45dB min. @ 500kHz


Max filtration: -80dB @ 150kHz


Bank 2 - High Current, Low Impedance


-50dB min. @ 100kHz


-60dB min. @ 250kHz


-45dB min. @ 500kHz


Max filtration: -63dB @ 250kHz



General

Weight 6.5 lbs.


Rack Ears Included


Dimensions 6 l x 17 w x 1.75 h, 2.19 h with feet



LAN Protection

Wires Protected 8-Wires


Jacks RJ-45


Compatibility 10/100/1000bT


Clamping Level 62V 6V @ 1 mA



TEL Protection

Wires Protected 2 Wires, 1 Pair (4, 5)


Jacks RJ-11


Fuseless/Auto-Resetting Yes


Clamping Level 260V



Universal Coax Protection

Shielded Yes


Insertion Loss < 0.5 dB


HD 1080 i/p Ready Yes


Frequency Range 0 MHz - 2.2 GHz


Connections Female "F", Gold Plated


Clamping Level 75V


Bidirectional Yes



mgctlbxN$MZP mgctlbxV$5.3.5 mgctlbxL$C